The EGIS 12V 100A Auxiliary Contact Contactor is designed to switch engine and auxiliary loads remotely so heavy battery cable does not have to be routed to a manual control point. Its hermetically sealed construction keeps dust and moisture away from the contact assembly, and the auxiliary contacts can be used to confirm the contactor state from a remote location.
This 12V-control version operates across an 8 to 16VDC control range while the contact system supports much higher switched-circuit voltage. The enclosure is rated IP67/IP69K and the unit is ignition protected to ISO 8846 / UL 1500 for installation in closed compartments. Stainless self-locking hardware and reinforced mounting holes support secure installation in marine and vehicle electrical systems.
EGIS rates the contactor for 6,000 cycles at 100A/350V and 100,000 cycles at 100A/14V. In a locked-starter fault condition, it can interrupt up to 1,250A at 14VDC. The specified operating-temperature range is -40 to 85°C, and the contactor is backed by a 4-year manufacturer warranty.
- Hermetically sealed contact assembly keeps dust and moisture away from switching components
- Ignition-protected construction supports enclosed marine and vehicle compartments
- IP67/IP69K enclosure is designed for harsh environmental exposure
- Auxiliary contacts provide a way to monitor on/off status remotely
- Self-locking stainless hardware helps resist corrosion and vibration
Browse more Relays, Combiners & Disconnects.
