The Springfield KingPin Standard Power-Rise Seat Post adjusts from 23-1/2 to 30-1/2 inches and fits a standard KingPin base. The gas cylinder lifts the seat when you release the lock. Springfield rates it ABYC Class H-31 B, which limits it to fishing use rather than as a helm seat while the boat is running.
KingPin is one of the most common pedestal systems on bass boats, so this post is often a direct replacement when an old post loses its gas charge or the finish wears out. Seven inches of travel covers a comfortable seated position and a leaning stance while casting. You can go from sitting to leaning height without getting out of the seat. A fresh gas cylinder restores the smooth lift that an older post loses over time, making the seat easier to use all day.
Confirm you have a standard KingPin base rather than the threaded type before ordering. Remove the post when trailering long distances if you can, and check the base bolts from time to time. The threaded post and full seat packages are in our seats, pedestals & slides. Rinse the post with fresh water after use so salt does not build up around the cylinder seal.
- Adjusts from 23-1/2 to 30-1/2 inches
- Fits a standard KingPin base
- Gas-assisted Power-Rise lift
- ABYC Class H-31 B, fishing only
